User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configure System Information User Manual81
Control the LEDs
Note: When the management mode is NETGEAR Insight Mobile App and
Insight Cloud Portal (Cloud/Remote), which means that the local browser
UI provides a limited menu only, you can still perform this task.
You can turn the system LEDs and port LEDs on the switch on and off. By default, a port LED
lights when you connect a powered-on device to the port. When the switch functions with its
LEDs off, we refer to it as Quiet mode.
To control the LEDs:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
For information about finding the IP address of the switch, see Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
Port The Bonjour service port number.
TXT data The Bonjour service text.
Table 14. Published Services information (continued)
Field Description