User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configure System Information User Manual80
8. Click the Apply button.
Your settings are saved.
View Bonjour information
To view Bonjour information:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
For information about finding the IP address of the switch, see Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
6. Select System > Management > Bonjour > Bonjour Details.
The Bonjour Information page displays. The page also shows the Published Services
section.
The Bonjour Information section shows whether Bonjour is enabled on the switch.
The following table describes the nonconfigurable fields.
Table 14. Published Services information
Field Description
Service Name The Bonjour service names in the switch.
Type The Bonjour service type names in the switch.
Domain The Bonjour service domain in the switch.