User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configure System Information User Manual52
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
6. Select System > Management > IPv6 Network Configuration.
The IPv6 Network Global Configuration page displays.
7. Ensure that the Admin Mode Enable radio button is selected.
8. Determine how the switch acquires an IPv6 address:
• IPv6 Address Auto Configuration Mode. When this mode is enabled, the network
interface can acquire an IPv6 address through IPv6 Neighbor Discovery Protocol
(NDP) and through the use of router advertisement messages. When this mode is
disabled, the network interface does not use the native IPv6 address
autoconfiguration feature to acquire an IPv6 address. Autoconfiguration can be
enabled only when DHCPv6 is not enabled on any of the management interfaces.
• DHCPv6. Next to Current Network Configuration Protocol, select the DHCPv6 radio
button to enable the DHCPv6 client on the interface. The switch attempts to acquire
network information from a DHCPv6 server. Selecting the None radio button disables
the DHCPv6 client on the network interface. When DHCPv6 is enabled, the DHCPv6
Client DUID field displays the client identifier used by the DHCPv6 client (if enabled)
when sending messages to the DHCPv6 server.
9. In the IPv6 Gateway field, specify the IPv6 address for the default gateway for the network
interface.
The gateway address is in IPv6 global or link-local address format.
10. To configure one or more static IPv6 addresses for the network interface, do the following:
a. In the IPv6 Prefix/Prefix Length field, specify the static IPv6 prefix and prefix to the
IPv6 network interface.
The address is in the global address format.
b. In the EUI64 menu, select True to enable the Extended Universal Identifier (EUI)
flag for IPv6 address, or select False to omit the EUI flag.
c. Click the Add button.
11. Click the Apply button.
Your settings are saved.