User Manual
Table Of Contents
- Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
- Contents
- 1 Getting Started
- Available publications
- Switch management options and default management mode
- Manage the switch by using the local browser UI
- Access the switch
- Credentials for the local browser UI
- Register and access the switch with your NETGEAR account
- Change the management mode of the switch
- Change the language of the local browser UI
- How to configure interface settings
- Use the Device View of the local browser UI
- 2 Configure System Information
- View or define system information
- Configure the IP network settings for management access
- Configure the time settings
- Manage the denial of service settings
- Configure the DNS settings
- Configure green Ethernet settings
- Manage the Bonjour settings and view Bonjour information
- Control the LEDs
- Use the Device View
- Configure Power over Ethernet
- Configure SNMP
- Configure Link Layer Discovery Protocol
- Configure DHCP snooping
- Set up Power over Ethernet timer schedules
- 3 Configure Switching
- Configure the port settings and maximum frame size
- Configure link aggregation groups
- Configure VLANs
- Manage the basic VLAN settings
- Configure VLAN membership
- View the VLAN status
- Configure the PVID settings for an interface
- Configure a MAC-based VLAN
- Configure protocol-based VLAN groups
- Configure protocol-based VLAN Group membership
- Configure a voice VLAN
- Configure the GARP switch settings
- Configure GARP ports
- Configure Auto-VoIP
- Configure Spanning Tree Protocol
- Configure multicast
- Configure multicast VLAN registration
- View, search, and configure the MAC address table
- Configure Layer 2 loop protection
- 4 Configuring Routing
- 5 Configure Quality of Service
- 6 Manage Switch Security
- Change the local device password for the local browser UI
- Manage the RADIUS settings
- Configure TACACS+ settings
- Configure authentication lists
- Configure management access
- Control access with profiles and rules
- Configure port authentication
- Set up traffic control
- Configure access control lists
- Use the ACL Wizard to create a simple ACL
- Configure a MAC ACL
- Configure MAC ACL rules
- Configure MAC bindings
- View or delete MAC ACL bindings in the MAC binding table
- Configure a basic or extended IPv4 ACL
- Configure rules for a basic IPv4 ACL
- Configure rules for an extended IPv4 ACL
- Configure an IPv6 ACL
- Configure rules for an IPv6 ACL
- Configure IP ACL interface bindings
- View or delete IP ACL bindings in the IP ACL binding table
- Configure VLAN ACL bindings
- 7 Perform Maintenance Tasks
- 8 Manage Power over Ethernet
- 9 Monitor the Switch
- A Configuration Examples
- B Switch Default Settings and Hardware Specifications
Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Switch Default Settings and Hardware
Specifications
User Manual473
For more information, see the data sheet, which you can download by visiting
netgear.com/support/download/.
Electromagnetic
certifications and
compliance
CE Mark, Commercial
EN55032:2015+AC:2016, Class A
CISPR 32:2015, Class A
EN55024:2010+A1:2015
EN61000-3-2:2014, Class A
EN61000-3-3:2013
VCCI-CISPR 32:2016, Class A
RCM, AS/NZS CISPR 32:2015 Class A
47 CFR FCC Part 15, Subpart B, Class A
ANSI C63.4:2014
ICES-003:2016 Issue 6, Class A
BSMI CNS 13438, Class A
KCC KN32 / KN35
GB4943.1-2011, YD/T993-1998, GB/T9254-2008, Class A
Safety certifications CB Mark, Commercial
IEC 60950-1:2005 (ed.2) + Am 1:2009 + Am 2:2013
UL 60950-1, 2nd, 2014 and CAN/CSA C22.2 No. 60950-1-07, 2nd, 2014
EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
RCM, AS/NZS 60950.1:2015
BSMI CNS14336-1
GB4943.1-2011, YD/T993-1998, GB/T9254-2008, Class A
Table 92. Hardware technical specifications and certifications (continued)
Feature Model GC108P Model GC108PP