User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Monitor the Switch User Manual426
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
6. Select Monitoring > Ports > Port Detailed Statistics.
The Port Detailed Statistics page displays.
7. From the Interface menu, select the interface for which you want to view the statistics.
8. From the MST ID menu, select the MST ID associated with the interface (if available).
9. To refresh the page with the latest information about the switch, click the Refresh button.
10. To clear all the counters, click the Clear button.
This resets all statistics for this port to the default values.
The following table describes the detailed port information displayed on the page. To view
information about a different port, select the port number from the Interface menu.
Table 80. Detailed port statistics
Field Description
ifIndex The interface index (ifIndex) for which the statistics are displayed.
Port Type For normal ports this field displays Normal. Otherwise, the possible values are
as follows:
• Mirrored. This port is a participating in port mirroring as a mirrored port. For
more information, see
Configure port mirroring on page 443.
• Probe. This port is a participating in port mirroring as the probe port. For
more information, see
Configure port mirroring on page 443.
• Trunk Member. The port is a member of a link aggregation trunk, which is
also referred to as a Link Aggregation Group (LAG).
Port Channel ID If the port is a member of a port channel, which is also referred to as a Link
Aggregation Group (LAG), the port channel’s interface ID and name are shown.
Otherwise, Disable is shown.
Port Role Each MST bridge port that is enabled is assigned a port role for each spanning
tree. The port role is one of the following values: Root, Designated, Alternate,
Backup, Master, or Disabled.
STP Mode The Spanning Tree Protocol administrative mode that is associated with the port
or port channel. The possible values are as follows:
• Enable. Spanning tree is enabled for this port.
• Disable. Spanning tree is disabled for this port.