User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Manage Power over Ethernet User Manual407
The previous figure does not show all columns on the page.
7. Select one or more PoE+ ports by taking one of the following actions:
• T
o configure a single PoE+ port, select the check box associated with the port, or type
the port number in the Go To Interface field and click the Go button.
• T
o configure multiple PoE+ ports with the same settings, select the check box
associated with each interface.
• T
o configure all PoE+ ports with the same settings, select the check box in the table
header.
8. Configure the settings as described in the following table.
The settings that you configure apply to all selected PoE+ ports.
Menu Item Description
Port Power Select the administrative mode of the port:
• Enable.
The port’s capacity to deliver power is enabled. This is the default
setting.
• Disable. The
port’s capacity to deliver power is disabled.
Port Priority The port priority determines which ports can still deliver power after the total
power delivered by the switch exceeds the total power budget of 124W
. (In such a
situation, the switch might not be able to deliver power to all connected devices.)
If the same priority applies to two ports, the lower-numbered port receives higher
priority
.
Select one of the following priorities:
• Low. Low priority
. This is the default setting.
• Medium. Medium priority
.
• High. High priority
.
• Critical. Critical priority
.