User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Manage Switch Security User Manual358
Change the name of an IPv6 ACL
To change the name of an IPv6 ACL:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
For information about finding the IP address of the switch, see Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
6. Select Security > ACL > Advanced > IPv6 ACL.
The IPv6 ACL Configuration page displays.
7. Select the check box that is associated with the IPv6 ACL.
8. In the IPv6 ACL field, specify the new name.
9. Click the Apply button.
Your settings are saved.
Rules The number of the rules associated with the IP ACL.
Type The type is IPv6 ACL.
Table 70. IPv6 Configuration and IPv6 ACL Table information (continued)
Field Description