User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Manage Switch Security User Manual333
5. Click the Login button.
The System Information page displays.
6. Select Security >
ACL > Basic > MAC Rules.
The previous figure does not show all columns.
7. From the ACL Name menu, select the MAC
ACL.
8. In the Sequence Number field, enter a whole number in the range of 1 to 2147483647 to
identify the rule.
9. From the Action menu, select the action that must be taken if a packet matches the rule’
s
criteria:
• Permit. Forwards packets that meet the
ACL criteria.
• Deny. Drops packets that meet the
ACL criteria.
10. In the Assign Queue ID field, specify the hardware egress queue identifier that must be
used to handle all packets matching this
ACL rule.
The valid range of queue IDs is 0 to 7.
11. From the Mirror Interface menu, select the specific egress interface to which the matching
traf
fic stream must be copied, in addition to being forwarded normally by the switch.
This field cannot be set if a redirect interface is already configured for the ACL rule. This
field is visible for a Permit action.
12. From the Redirect Interface menu, select the egress interface to which the matching traf
fic
stream must be redirected, bypassing any forwarding decision normally performed by the
switch.
This field cannot be set if a mirror interface is already configured for the ACL rule.
13. From the Match Every menu, select whether each Layer 2 MAC packet must be matched
against the rule:
• True. Each packet must match the selected
ACL rule.
• False. Not all packets need to match the selected
ACL rule.
14. In the CoS field, specify the 802.1p user priority that must be compared against the
information in an Ethernet frame.
The valid range of values is 0 to 7.
15. In the Destination MAC field, specify the destination MAC address that must be compared
against the information in an Ethernet frame.