User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Getting Started User Manual33
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
6. Select the Direct Connect Web-browser Interface radio button.
An Alert pop-up window opens.
7. Read the text, and click the OK button.
The pop-up window closes.
8. Click the Apply button.
Another pop-up window opens.
9. Click the OK button.
The pop-up window closes, the System Information page closes, and your settings are
saved. Any current Insight-manageable device settings are saved to the cloud server.
The Local Device Login page displays.
10. Log in again.
The System Information page displays and the full menu of the local browser UI is now
available.
Change the management mode back to NETGEAR Insight
Mobile App and Insight Cloud Portal
To change the management mode of the switch back to NETGEAR Insight Mobile App
and Insight Cloud Portal:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.