User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Manage Switch Security User Manual318
Configure private VLAN association settings
To configure private VLAN association:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
For information about finding the IP address of the switch, see
Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
6. Select Security > T
raffic Control > Private VLAN > Private VLAN Association
Configuration.
The Private VLAN Association page displays.
7. From the Primary VLAN menu, select the primary VLAN ID of the domain.
8. In the Secondary VLANs field, enter the VLAN that you want to associate with the primary
VLAN.
9. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 67. Private VLAN Association information
Field Description
Isolated VLAN The isolated VLAN associated with the selected primary VLAN.
Community VLANs The list of community VLANs associated with the selected primary VLAN.