User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Manage Switch Security User Manual317
Configure the type of VLAN for a private VLAN.
You can configure the private VLAN type.
To configure a private VLAN type:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
For information about finding the IP address of the switch, see Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
6. Select Security > Traffic Control > Private VLAN > Private VLAN Type Configuration.
The Private VLAN Type Configuration page displays.
7. Select the check box that is associated with the VLAN ID that you want to configure.
8. From the Private VLAN Type menu, select the type of private VLAN. Possible values are
as follows:
• Primary. Sets the private VLAN type as primary.
• Isolated. Sets the private VLAN type as isolated.
• Community. Sets the private VLAN type as community.
• Unconfigured. Sets the private VLAN type as unconfigured. The default is
Unconfigured.
9. Click the Apply button.
Your settings are saved.