User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Manage Switch Security User Manual294
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
6. Select Security
> Access > Access Control > Access Profile Configuration.
The Access Rule Configuration page displays.
The Packets Filtered field displays the number of packets filtered (none in the previous
figure).
7. T
o refresh the page with the latest information about the switch, click the Refresh button.
The following table describes the nonconfigurable data that is displayed.
Table 61. Access profile configuration profile summary
Field Description
Rule Type The action performed when the rules match.
Service Type The selected service type. The policy is restricted by the selected service type
chosen.
The possible methods are HTTP, and secure HTTP (SSL).
Source IP Address Source IP address of the client originating the management traffic.
Mask The subnet mask of the IP Address of the client originating the management traffic.
Priority The priority of the rule. The rules are validated against the incoming management
request in the ascending order of their priorities. If a rule matches, action is
performed and subsequent rules are ignored. For example, if a source IP address
of 10.10.10.10 is configured with priority 1 to permit and source IP address
10.10.10.10 is configured with priority 2 to deny
, access is permitted if the profile is
active, and the second rule is ignored.
Deactivate an access profile
You can deactivate an access profile.
To deactivate an access profile:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.