User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Getting Started User Manual25
6. Select the Direct Connect Web-browser Interface radio button.
An Alert pop-up window opens.
7. Read the text, and click the OK button.
The pop-up window closes.
8. Click the Apply button.
Your settings are saved.
The System Information page closes and any current Insight-manageable device settings
are saved to the cloud server.
The Local Device Login page displays.
9. Enter the local device password or, if you already added the switch to an Insight network
location, enter the Insight network password to access the local browser UI.
Note: After you add the switch to an Insight network location, the Insight
network password replaces the switch local device password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
10. Click the Login button.
The System Information page displays. The full menu of the local browser UI is now
available.
Access the switch off-network and not connected to the
Internet
Note: Before you can access the full menu of the local browser UI, you must
connect the switch to a network with Internet access at least once so
that you can register the switch with NETGEAR and unlock the full
menu. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
The default IP address of the switch is 192.168.0.239. The IP address of the computer that
you use to access the switch off-network must in the same subnet as the default IP address
of the switch.
To access the switch off-network and not connected to the Internet after you
registered the switch with NETGEAR:
1. Record your computer’s TCP/IP configuration settings, and change the IP settings of
your computer to be in the same subnet as the IP settings of the switch.