User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configuring Routing User Manual225
The following table provides information included in the routing VLANs ARP cache section.
Table 51. ARP cache information for routing VLANs
Field Description
IP Address The associated IP address of a device on a subnet attached to one of the switch's
existing routing interfaces.
Interface The routing interface associated with the ARP entry.
MAC Address The unicast MAC address of the device.
Type The type of the ARP entry. Possible values are:
• Local.
An ARP entry associated with one of the switch’s routing interface’s MAC
addresses.
• Gateway. A dynamic
ARP entry for which the IP address is that of a router.
• Static. An
ARP entry configured by the user.
• Dynamic. An ARP
entry which was learned by the switch
Age Age since the entry was last refreshed in the ARP Table. The format is hh:mm:ss.
Create a static ARP entry
You can add a static entry to the ARP table.
To add an entry to the ARP table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
For information about finding the IP address of the switch, see
Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.