User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configuring Routing User Manual224
View entries in the ARP cache
You can view entries in the ARP table.
To display entries in the ARP table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
For information about finding the IP address of the switch, see
Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
6. Select Routing >
ARP > Basic > ARP Cache.
The Management VLAN ARP Cache page displays. The page also shows the Routing
VLANs
ARP Cache section.
7. To refresh the page with the latest information about the switch, click the Refresh button.
The following table provides information included in the management VLAN ARP cache
section.
Table 50. ARP cache information
Field Description
IP Address The associated IP address of a device on a subnet attached to one of the
switch’
s existing routing interfaces.
Port The associated interface of the connection.
MAC Address The MAC address of the device.