User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configuring Routing User Manual217
c. In the Subnet Mask field, enter a subnet mask for the VLAN routing interface.
d. Click the Add button.
The VLAN becomes a routing VLAN.
The following table describes the VLAN routing interface status information on the page.
Table 48. VLAN routing interface information
Field Description
Port The port number assigned to the VLAN Routing Interface.
MAC Address The MAC Address assigned to the VLAN Routing Interface.
Routing Mode Shows whether the routing mode is enabled (Enable or Disable).
Change an existing routing VLAN
To change the settings for an existing routing VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
For information about finding the IP address of the switch, see
Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
6. Select Routing > VLAN > VLAN Routing Configuration.
The VLAN Routing Configuration page displays.
7. From the VLAN list, select the VLAN.
8. Change the settings as needed.