User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configure Switching User Manual201
• Search by Interface. From the Search menu, select Interface, and enter the
interface ID using the respective interface naming convention (for example, g1 or l1).
Then click the Go button.
8. T
o refresh the page with the latest information about the switch, click the Refresh button.
The following table describes the nonconfigurable information displayed on the page.
Table 44. MAC Address Table information
Field Description
Total MAC Address The number of total MAC addresses learned or configured.
VLAN ID The VLAN ID associated with the MAC address.
MAC Address The unicast MAC address for which the switch holds forwarding, filtering information, or
both.
The format is a 6-byte MAC address that is separated by colons, for example
01:23:45:67:89:AB.
Interface The interface on which the address was learned.
Status The status of this entry, which can be one of the following:
• Static.
The instance was added by the system or a user and cannot be relearned.
• Learned. The
instance was learned, and is being used.
• Management.
The value of the corresponding instance for the system MAC
address is also the value of an existing instance for dot1dStaticAddress.
Set the dynamic address aging interval
You can set the address aging interval for the specified forwarding database.
To set the address aging interval:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
For information about finding the IP address of the switch, see
Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.