User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Getting Started User Manual20
Note: After you add the switch to an Insight network location, the Insight
network password replaces the switch local device password.
For more information about the credentials, see Credentials for the local browser UI on
page 28.
11. Click the Login button.
The System Information page displays. A limited menu of the local browser UI is
available.
12. Select the Direct Connect Web-browser Interface radio button.
An Alert pop-up window opens.
13. Read the text, and click the OK button.
The pop-up window closes.
14. Click the Apply button.
Your settings are saved.
The System Information page closes and any current Insight-manageable device settings
are saved to the cloud server.
The Local Device Login page displays.
15. Enter the local device password or, if you already added the switch to an Insight network
location, enter the Insight network password to access the local browser UI.
Note: After you add the switch to an Insight network location, the Insight
network password replaces the switch local device password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
16. Click the Login button.
The System Information page displays. The full menu of the local browser UI is now
available.
Use a Mac with Bonjour to access the switch on-network
If your Mac supports Bonjour, you can use the following procedure. If you Mac does not
support Bonjour, see
Use other options to discover the switch IP address on page 23.
For the following procedure, the network must provide Internet access.
To use a Mac and web browser to access the switch that is connected to a network:
1. Cable the switch to a network with a router or DHCP server that manages IP addresses.
2. Power on the switch.
The DHCP server assigns the switch an IP address.
3. Connect your computer to the same network as the switch.