User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configure Switching User Manual189
9. From the Multicast Router menu, select to enable or disable the multicast router for the
selected interfaces.
10. Click the Apply button.
Your settings are saved.
Configure a multicast router VLAN for MLD snooping
To configure a multicast router VLAN for MLD snooping:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
For information about finding the IP address of the switch, see Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
6. Select Switching> Multicast > MLD Snooping > Multicast Router VLAN Configuration.
The Multicast Router VLAN Configuration page displays.
7. From the Interface menu, select the interface for which you want the multicast router to be
enabled.
8. In the VLAN ID field, specify the VLAN ID.
9. From the Multicast Router menu, select to enable or disable the multicast router for the
VLAN.
10. Click the Apply button.
Your settings are saved.