User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Getting Started User Manual17
Note: For information about installing a security certificate, see Use an HTTP
session to download and install an SSL security certificate file on the
switch on page 382.
13. Enter your credentials, which depend on the page that displays:
• Register to unlock all features page displays. If this is the first time that you log in
to the local browser UI, the Register to unlock all features page displays. Click the
Log in with NETGEAR account button, and follow the directions onscreen to
register the switch with your NETGEAR email address and password (the same
credentials that you entered in
Step 5). You are only prompted to do this once to
confirm registration of your switch.
If you did not yet create a NETGEAR account, click the Create account link, follow
the directions onscreen to create an account, and register the switch with your
NETGEAR email address and password.
• Local Device Login page displays. If you previously logged in to the local browser UI
and already entered your NETGEAR email address and password, the Local Device
Login page displays. Enter one of the following credentials:
- Local device password. Enter the local device password.
The default local device password is password. The first time that you enter the
default local device password, the Change Default Password page displays,
requiring you to customize the local device password.
- Insight network password. If you already added the switch to an Insight network
location, enter the Insight network password to access the local browser UI.
Note: After you add the switch to an Insight network location, the Insight
network password replaces the switch local device password.
For more information about the credentials, see Credentials for the local browser UI on
page 28.
14. Click the Login button.
The System Information page displays. A limited menu of the local browser UI is
available.
15. Select the Direct Connect Web-browser Interface radio button.
An Alert pop-up window opens.
16. Read the text, and click the OK button.
The pop-up window closes.
17. Click the Apply button.
Your settings are saved.
The System Information page closes and any current Insight-manageable device settings
are saved to the cloud server.
The Local Device Login page displays.