User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configure Switching User Manual165
8. Click the Go button.
If the address exists, the entry is displayed. An exact match is required.
9. T
o refresh the page with the latest information about the switch, click the Refresh button.
10. T
o clear the information, click the Clear button.
The following table describes the information in the MFDB table.
Table 34. MFDB table information
Field Description
MAC Address The multicast MAC address for which you requested data.
VLAN ID The VLAN ID to which the multicast MAC address is related.
Component The component that is responsible for this entry in the Multicast Forwarding
Database. Possible values are IGMP snooping, GMRP
, Static Filtering and MLD
snooping.
Type The type of the entry. Static entries are those that are configured by the end user.
Dynamic entries are added to the table as a result of a learning process or protocol.
Description The text description of this multicast table entry. Possible values are Management
Configured, Network Configured, and Network
Assisted.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:) for
the selected address.
Forwarding Interfaces The list of forwarding interfaces. This list is derived from combining all forwarding
interfaces and removing the interfaces that are listed as static filtering interfaces.
View the MFDB statistics
To view the MFDB statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
For information about finding the IP address of the switch, see
Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.