User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configure Switching User Manual163
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.
6. Select Switching > STP >
Advanced > STP Statistics.
The STP Statistics page displays.
7. Select whether to display physical interfaces, LAGs, or both by clicking one of the following
links above the table header:
•1 (the unit ID of the switch). Only physical interfaces are displayed.
This is the default
setting.
• LAG. Only LAGs are displayed.
• All. Both physical interfaces and LAGs are displayed.
8. T
o refresh the page with the latest information about the switch, click the Refresh button.
The following table describes the information available about the STP Statistics page.
Table 33. STP Statistics
Field Description
Interface The physical or port channel interfaces of the switch.
STP BPDUs Received The number of STP BPDUs received at the port.
STP BPDUs Transmitted The number of STP BPDUs transmitted from the port.
RSTP BPDUs Received The number of RSTP BPDUs received at the port.
RSTP BPDUs Transmitted The number of RSTP BPDUs transmitted from the port.
MSTP BPDUs Received The number of MSTP BPDUs received at the port.
MSTP BPDUs Transmitted The number of MSTP BPDUs transmitted from the port.