User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configure Switching User Manual134
You can enter keywords such as arp, ip, and ipx. Separate keywords with a comma. You
can also enter hexadecimal or decimal values in the range of 0x0600 (1536) to 0xFFFF
(65535).
10. In the VLAN ID field, enter the VLAN ID.
The ID can be any number in the range of 1 to 4093. All the ports in the group assign this
VLAN ID to untagged packets received for the protocols that you included in this group.
11. Click the Add button.
The protocol-based VLAN group is added to the table.
The following table describes the nonconfigurable information displayed on the page.
Table 24. Protocol Based VLAN Group Configuration information
Field Description
Ports The member ports that belong to the group.
Configure protocol-based VLAN Group membership
To configure protocol-based VLAN group membership:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
For information about finding the IP address of the switch, see
Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.
5. Click the Login button.
The System Information page displays.