User Manual

Insight Managed 8-Port Gigabit (Hi-Power) PoE+ Smart Cloud Switch with NETGEAR FlexPoE Power
Configure Switching User Manual127
11. Click the Apply button.
Your settings are saved.
The following table describes the nonconfigurable information displayed on the page.
Table 21. Advanced VLAN membership
Field Definition
VLAN Name The name for the VLAN that you selected. It can be up to 32 alphanumeric characters long,
including blanks.
The names for the following VLANs are predefined:
• VLAN 1. Default.
• VLAN 4088. Auto-V
oIP.
• VLAN 4089. Auto-V
ideo.
VLAN Type The type of the VLAN you selected:
• Default (VLAN ID = 1).
Always present.
• Static. A
VLAN that you configured.
• Dynamic.
A VLAN that is created through GVRP registration, that you did not convert
to a static VLAN, and that GVRP can therefore remove.
View the VLAN status
You can view the status of all currently configured VLANs.
To view the VLAN status:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
For information about finding the IP address of the switch, see
Access the switch on
page 14.
The Local Device Login page displays.
If you did not yet register the switch with your NETGEAR account, the Register to unlock
all features page displays. For more information, see
Register and access the switch with
your NETGEAR account on page 29.
4. Enter one of the following passwords:
• After registration, enter your customized local device password.
• If you previously added the switch to an Insight network location, enter the Insight
network password.
For more information about the local device password and the Insight network password,
see
Credentials for the local browser UI on page 28.