GC510P-GC510PP Quick Install Guide

ManualsBrandsNETGEAR ManualsComputers & Accessories8-Port Gigabit Ethernet PoE+ Smart Switch with optional Remote/Cloud and FlexPoE Power (126W)

September 2017

are trademarks of NETGEAR, Inc. Any non‑NETGEAR

trademarks are used for reference purposes only.

NETGEAR, Inc.

350 East Plumeria Drive

San Jose, CA 95134, USA

NETGEAR INTL LTD

Building 3, University Technology Centre

Curraheen Road, Cork, Ireland

Support

Thank you for purchasing this NETGEAR product. You can visit

www.netgear.com/support to register your product, get help, access the latest

downloads and user manuals, and join our community. We recommend that you

use only ocial NETGEAR support resources.

Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français

canadien à http://downloadcenter.netgear.com/other/.

(If this product is sold in Canada, you can access this document in Canadian-French at

http://downloadcenter.netgear.com/other/.)

For the current EU Declaration of Conformity, visit

http://support.netgear.com/app/answers/detail/a_id/11621/.

For regulatory compliance information, visit

http://www.netgear.com/about/regulatory/.

See the regulatory compliance document before providing power to the switch.

Troubleshooting Tips

Here are some tips for correcting simple problems that might occur:

• If you cannot connect with the NETGEAR Insight app to the switch,

make sure that your mobile device and the switch are connected to the

same WiFi network.

• Make sure that the Ethernet cables are plugged in correctly and that for

each powered-on device connected to the switch, the corresponding

le port LED on the switch either lights solid green (indicating a valid

connection) or blinks green (indicating that trac is being processed).

• Make sure that the PoE Max LED is o. Model GC510P provides a total

power budget of 134 watts. Model GC510PP provides a total power

budget of 195 watts. If the PoE Max LED is solid amber, disconnect one

or more powered devices (PDs) to prevent PoE oversubscription. Start

by disconnecting the PD from the highest-numbered port.

Note: You can also access the web browser-based management interface

of the switch to manually override the amount of power that is reserved for

each PoE port and attached PD. For more information, see the user manual,

which you can download by visiting netgear.com/support/product/GC510P or

netgear.com/support/product/GC510PP.

• For each powered PD that is connected to the switch, the

corresponding le port LED on the switch either lights solid green

(indicating a valid connection) or blinks green (indicating that trac is

being processed), and the corresponding right port LED on the switch

lights solid green (indicating that PoE is being delivered to the PD). If

the right port LED lights solid amber, a PoE fault occurred. For more

information, see the user manual, which you can download by visiting

netgear.com/support/product/GC510P or netgear.com/support/product/

GC510PP.

¾ To conﬁgure the switch:

1. On your iOS or Android mobile device, go to the app store, search for

NETGEAR Insight, and download the app.

2. If the switch is directly connected to a WiFi router or access point (see

Step 4, Option 1, in Connect the Switch to Your Network), connect your

mobile device to the WiFi network of the router or access point.

3. Open the NETGEAR Insight app.

4. Select LOG IN to log in to your existing NETGEAR account or tap the

CREATE NETGEAR ACCOUNT button to create a new account.

5. Aer you log in to your account, name your network and specify a

device admin password that applies to all devices that you add to this

network.

When you are done, tap the NEXT button.

6. You can now add a device. Choose one of the following options:

• Type in the serial number.

• Scan the serial number bar code.

• Tap Switch as the device type and follow the prompts to scan the network

or scan the QR code.

Note: Screens might display and suggest that you connect the switch to power

and to an uplink. Since you already did this (see Connect the Switch to Your

Network), on these screens, tap the NEXT button.

7. If the switch is not yet connected to the same WiFi network as your

mobile device, connect it now to the same WiFi network, wait two

minutes, and then tap the NEXT button.

8. Aer the switch is discovered and registered on the network, select the

switch to conﬁgure and manage it through the NETGEAR Insight app.

For more information on how to connect a NETGEAR Insight managed

switch to an existing network, visit https://kb.netgear.com/000044341.

Insight