GC110-GC110P Hardware Installation Guide
Table Of Contents
- Contents
- 1. Introduction
- 2. Hardware Overview
- 3. Applications
- 4. Installation
- Step 1: Prepare the Site
- Step 2: Protect Against Electrostatic Discharge
- Step 3: Unpack the Switch
- Step 4: Install the Switch
- Optional Step 5: Install SFP Transceiver Modules
- Step 6: Connect Devices to the Switch
- Step 7: Check the Installation
- Step 8: Apply Power and Check the LEDs
- Step 9: Manage the Switch
- 5. Troubleshooting
3
Applications
The switch is designed to provide flexibility in configuring network connections.The switch can be used as your
only network traffic–distribution device for PoE (on model GC110P) and non-PoE devices or with 10 Mbps, 100
Mbps, and 1 Gbps Ethernet and fiber hubs, routers, and switches.
This chapter includes the following sections:
• PoE Applications
• Desktop Switching
16