GC108P-GC108PP Hardware Installation Guide
Table Of Contents
- Contents
- 1. Introduction
- 2. Hardware Overview
- 3. Applications
- 4. Installation
- 5. Troubleshooting
4
Installation
This chapter describes the installation procedures for the switch. Switch installation
involves the steps described in the following sections:
• Step 1: Prepare the site
• Step 2: Protect against electrostatic discharge
• Step 3: Unpack the switch
• Step 4: Install the switch
• Step 5: Connect devices to the switch
• Step 6: Check the installation
• Step 7: Apply power and check the LEDs
• Step 8: Manage the switch
23