User's Manual Part 3
Table Of Contents
- Chapter 9 Maintenance
- Chapter 10 Advanced Configuration
- Chapter 11 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Networks, Routing, and Firewall Basics
- Appendix C Preparing Your Network
- Appendix D Firewall Log Formats
- Appendix E Wireless Networking Basics
- Appendix F Virtual Private Networking
- Appendix G NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P
- Appendix H NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVS328
- Glossary
- Index
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Virtual Private Networking 8-47
March 2004, 202-10027-01
A sample Connection Monitor screen for a different connection is shown below:
Figure 8-35: Connection Monitor screen
In this example the following connection options apply:
• The FWG114P has a public IP WAN address of 66.120.188.153
• The FWG114P has a LAN IP address of 192.168.0.1
• The VPN client PC is behind a home NAT router and has a dynamically assigned address
of 192.168.0.3
While the connection is being established, the Connection Name field in this menu will say “SA”
before the name of the connection. When the connection is successful, the “SA” will change to the
yellow key symbol shown in the illustration above.
Viewing the FWG114P VPN Status and Log Information
Information on the status of the VPN client connection can be viewed by opening the FWG114P
VPN Status screen. To view this screen, click the VPN Status link on the FWG114P main menu.