User's Manual Part 3
Table Of Contents
- Chapter 9 Maintenance
- Chapter 10 Advanced Configuration
- Chapter 11 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Networks, Routing, and Firewall Basics
- Appendix C Preparing Your Network
- Appendix D Firewall Log Formats
- Appendix E Wireless Networking Basics
- Appendix F Virtual Private Networking
- Appendix G NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P
- Appendix H NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVS328
- Glossary
- Index
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Preparing Your Network C-3
March 2004, 202-10027-01
You must have an Ethernet adapter, the TCP/IP protocol, and Client for Microsoft Networks.
If you need to install a new adapter, follow these steps:
a. Click the Add button.
b. Select Adapter, and then click Add.
c. Select the manufacturer and model of your Ethernet adapter, and then click OK.
If you need TCP/IP:
a. Click the Add button.
b. Select Protocol, and then click Add.
c. Select Microsoft.
d. Select TCP/IP, and then click OK.
Note: It is not necessary to remove any other network components shown in the
Network window in order to install the adapter, TCP/IP, or Client for Microsoft
Networks.