User's Manual Part 3
Table Of Contents
- Chapter 9 Maintenance
- Chapter 10 Advanced Configuration
- Chapter 11 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Networks, Routing, and Firewall Basics
- Appendix C Preparing Your Network
- Appendix D Firewall Log Formats
- Appendix E Wireless Networking Basics
- Appendix F Virtual Private Networking
- Appendix G NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P
- Appendix H NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVS328
- Glossary
- Index
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
8-44 Virtual Private Networking
March 2004, 202-10027-01
6.
Configure the Global Policy Settings.
a. From the Options menu at the top of the Security Policy Editor window, select Global
Policy Settings.
Figure 8-33: Security Policy Editor Global Policy Options
b. Increase the Retransmit Interval period to 45 seconds.
c. Select the Allow to Specify Internal Network Address check box and click OK.
7. Save the VPN Client Settings.
From the File menu at the top of the Security Policy Editor window, select Save.
After you have configured and saved the VPN client information, your PC will automatically
open the VPN connection when you attempt to access any IP addresses in the range of the
remote VPN router’s LAN.
Note: Whenever you make changes to a Security Policy, save them first, then deactivate
the security policy, reload the security policy, and finally activate the security policy.
This ensures that your new settings will take effect.