User's Manual Part 3
Table Of Contents
- Chapter 9 Maintenance
- Chapter 10 Advanced Configuration
- Chapter 11 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Networks, Routing, and Firewall Basics
- Appendix C Preparing Your Network
- Appendix D Firewall Log Formats
- Appendix E Wireless Networking Basics
- Appendix F Virtual Private Networking
- Appendix G NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P
- Appendix H NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVS328
- Glossary
- Index
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Virtual Private Networking 8-43
March 2004, 202-10027-01
Figure 8-32: Connection Security Policy Key Exchange (Phase 2)
b. Configure the Key Exchange (Phase 2).
• Expand the Key Exchange (Phase 2) heading, and click on Proposal 1.
• For this example, ensure that the following settings are configured:
– In the SA Life menu, select Unspecified.
– In the Compression menu, select None.
– Check the Encapsulation Protocol (ESP) check box.
– In the Encrypt Alg menu, select Triple DES.
– In the Hash Alg, select SHA-1.
– In the Encapsulation menu, select Tunnel.