User's Manual Part 3
Table Of Contents
- Chapter 9 Maintenance
- Chapter 10 Advanced Configuration
- Chapter 11 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Networks, Routing, and Firewall Basics
- Appendix C Preparing Your Network
- Appendix D Firewall Log Formats
- Appendix E Wireless Networking Basics
- Appendix F Virtual Private Networking
- Appendix G NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P
- Appendix H NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVS328
- Glossary
- Index
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
8-42 Virtual Private Networking
March 2004, 202-10027-01
5.
Configure the Connection Security Policy
In this step, you will provide the authentication (IKE Phase 1) settings, and the key exchange
(Phase 2) settings. The setting choices in this procedure follow the VPNC guidelines.
Figure 8-31: Connection Security Policy Authentication (Phase 1)
a. Configure the Authentication (Phase 1) Settings.
• Expand the Security Policy heading, then expand the Authentication (Phase 1)
heading, and click on Proposal 1.
• For this example, ensure that the following settings are configured:
– In the Encrypt Alg menu, select Triple DES.
– In the Hash Alg, select SHA-1.
– In the SA Life, select Unspecified.
– In the Key Group menu, select Diffie-Hellman Group 2.