User's Manual Part 3
Table Of Contents
- Chapter 9 Maintenance
- Chapter 10 Advanced Configuration
- Chapter 11 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Networks, Routing, and Firewall Basics
- Appendix C Preparing Your Network
- Appendix D Firewall Log Formats
- Appendix E Wireless Networking Basics
- Appendix F Virtual Private Networking
- Appendix G NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P
- Appendix H NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVS328
- Glossary
- Index
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
G-8 NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P
March 2004, 202-10027-01
– Type the LAN Subnet Mask of Gateway B (255.255.255.0 in our example) in the Local IP
Subnet Mask field.
Figure G-9: NETGEAR FWG114P VPN – Auto Policy (part 2)
– From the Traffic Selector Remote IP drop-down box, select Subnet address.
– Type the starting LAN IP Address of Gateway A (10.5.6.1 in our example) in the Remote
IP Start IP Address field.
– Type the finishing LAN IP Address of Gateway A (0.0.0.0 in our example) in the Remote
IP Finish IP Address field.
– Type the LAN Subnet Mask of Gateway A (255.255.255.0 in our example) in the Remote
IP Subnet Mask field.
– From the AH Configuration Authentication Algorithm drop-down box, select MD5.
– Select Enable Encryption in the ESP Configuration Enable Encryption check box.
– From the ESP Configuration Encryption Algorithm drop-down box, select 3DES.
– Select Enable Authentication in the ESP Configuration Enable Authentication check box.
– From the ESP Configuration Authentication Algorithm drop-down box, select MD5.
– Select NETBIOS Enable in the NETBIOS Enable check box.
5. Click the Apply Button. You will be taken back to the VPN Policies Menu page.