User's Manual Part 3
Table Of Contents
- Chapter 9 Maintenance
- Chapter 10 Advanced Configuration
- Chapter 11 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Networks, Routing, and Firewall Basics
- Appendix C Preparing Your Network
- Appendix D Firewall Log Formats
- Appendix E Wireless Networking Basics
- Appendix F Virtual Private Networking
- Appendix G NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P
- Appendix H NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVS328
- Glossary
- Index
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
G-2 NETGEAR VPN Configuration FVS318 or FVM318 to FWG114P
March 2004, 202-10027-01
Figure G-1: Addressing and Subnet Used for Examples
Step-By-Step Configuration of FVS318 or FVM318 Gateway A
1. Log in to the FVS318 or FVM318 labeled Gateway A as in the illustration.
Out of the box, the FVS318 or FVM318 is set for its default LAN address of
http://192.168.0.1 with its default user name of
admin and default password of password. For
this example we will assume you have set the local LAN address as 10.5.6.1 for Gateway A
and have set your own password.
Figure G-2: NETGEAR FVS318 VPN Settings Pre-Configuration
Gateway A
22.23.24.25
14.15.16.17
10.5.6.0/24 172.23.9.0/24
172.23.9.110.5.6.1
WAN IP
WAN IP
LAN IPLAN IP
Gateway B
VPNC Example
Network Interface Addressing