User's Manual Part 2
Table Of Contents
- Chapter 7 Print Server
- Chapter 8 Virtual Private Networking
- Overview of FWG114P Policy-Based VPN Configuration
- Using Digital Certificates for IKE Auto-Policy Authentication
- Walk-Through of Configuration Scenarios on the FWG114P
- How to Use the VPN Wizard to Configure a VPN Tunnel
- Netgear VPN Client to FWG114P
- Step-By-Step Configuration of FWG114P Gateway
- Step-By-Step Configuration of the Netgear VPN Client
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Virtual Private Networking 8-39
March 2004, 202-10027-01
1.
Install the Netgear VPN Client Software on the PC.
• You may need to insert your Windows CD to complete the installation.
• Reboot your PC after installing the client software.
2. Configure the Connection Network Settings.
Figure 8-25: Security Policy Editor New Connection
a. Run the Security Policy Editor program and create a VPN Connection.
Figure 8-26: Security Policy Editor Options menu
Note: Before installing the Netgear VPN Client software, be sure to turn off any virus
protection or firewall software you may be running on your PC.