User's Manual Part 2
Table Of Contents
- Chapter 7 Print Server
- Chapter 8 Virtual Private Networking
- Overview of FWG114P Policy-Based VPN Configuration
- Using Digital Certificates for IKE Auto-Policy Authentication
- Walk-Through of Configuration Scenarios on the FWG114P
- How to Use the VPN Wizard to Configure a VPN Tunnel
- Netgear VPN Client to FWG114P
- Step-By-Step Configuration of FWG114P Gateway
- Step-By-Step Configuration of the Netgear VPN Client
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
8-36 Virtual Private Networking
March 2004, 202-10027-01
3. Click the VPN Policies link under the VPN category on the left side of the main menu. This
will take you to the VPN Policies Menu page. Click Add Auto Policy. This will open a new
screen titled VPN – Auto Policy.
Figure 8-24: VPN – Auto Policy settings
– Enter a unique name to identify this policy. This name is not supplied to the remote VPN
endpoint. In our example, we use VPNclient as the Policy Name.
– From the IKE policy drop-down box, select VPNclient which is the IKE Policy that was
set up in the earlier step.