User's Manual Part 2
Table Of Contents
- Chapter 7 Print Server
- Chapter 8 Virtual Private Networking
- Overview of FWG114P Policy-Based VPN Configuration
- Using Digital Certificates for IKE Auto-Policy Authentication
- Walk-Through of Configuration Scenarios on the FWG114P
- How to Use the VPN Wizard to Configure a VPN Tunnel
- Netgear VPN Client to FWG114P
- Step-By-Step Configuration of FWG114P Gateway
- Step-By-Step Configuration of the Netgear VPN Client
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
8-34 Virtual Private Networking
March 2004, 202-10027-01
2. Click IKE Policies under the VPN menu and click Add on the IKE Policies Menu.
Figure 8-23: NETGEAR FWG114P IKE Policy Configuration
– Enter a descriptive name for the policy in the Policy Name field. This name is not supplied
to the remote VPN endpoint. It is used to help you manage the IKE policies. In our
example, we used VPNclient as the Policy Name.
– From the Direction/Type drop-down box, select Remote Access.
– From the Exchange Mode drop-down box, select Aggressive Mode. This will also be
selected in the VPN Client My Identity ID Type fields, as seen in “Security Policy” on
page 8-41.
– From the Local Identity drop-down box, select Fully Qualified Domain Name (the actual
WAN IP address of the FWG114P will also be used in the Connection ID Type fields of
the VPN Client as seen in “Security Policy Editor New Connection” on page 8-39).
– For this example we typed FWG114P in the Local Identity Data field.