User's Manual Part 2
Table Of Contents
- Chapter 7 Print Server
- Chapter 8 Virtual Private Networking
- Overview of FWG114P Policy-Based VPN Configuration
- Using Digital Certificates for IKE Auto-Policy Authentication
- Walk-Through of Configuration Scenarios on the FWG114P
- How to Use the VPN Wizard to Configure a VPN Tunnel
- Netgear VPN Client to FWG114P
- Step-By-Step Configuration of FWG114P Gateway
- Step-By-Step Configuration of the Netgear VPN Client
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
8-28 Virtual Private Networking
March 2004, 202-10027-01
– E-mail Address. You can enter your e-mail address here.
d. Click the Next button to continue. The FWG114P generates a Self Certificate Request as
shown below.
Figure 8-18: Self Certificate Request data
4. Transmit the Self Certificate Request data to the Trusted Root CA.
a. Highlight the text in the Data to supply to CA area, copy it, and paste it into a text file.
b. Give the certificate request data to the CA. In the case of a Windows 2000 internal CA,
you might simply e-mail it to the CA administrator. The procedures of a CA like Verisign
and a CA, such as a Windows 2000 certificate server administrator will differ. Follow the
procedures of your CA.
Highlight, copy and
paste this data into
a text file.