User's Manual Part 2
Table Of Contents
- Chapter 7 Print Server
- Chapter 8 Virtual Private Networking
- Overview of FWG114P Policy-Based VPN Configuration
- Using Digital Certificates for IKE Auto-Policy Authentication
- Walk-Through of Configuration Scenarios on the FWG114P
- How to Use the VPN Wizard to Configure a VPN Tunnel
- Netgear VPN Client to FWG114P
- Step-By-Step Configuration of FWG114P Gateway
- Step-By-Step Configuration of the Netgear VPN Client
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Virtual Private Networking 8-21
March 2004, 202-10027-01
c. From the main menu Advanced section, click on the LAN IP Setup link.
Figure 8-13: LAN IP configuration menu
d. Configure the LAN IP address according to the settings above and click Apply to save
your settings. For more information on LAN TCP/IP setup topics, please see “Using the
LAN IP Setup Options” on page 10-5.
Note: After you click Apply to change the LAN IP address settings, your workstation will
be disconnected from the FWG114P. You will have to log on with http://10.5.6.1, which is
now the address you use to connect to the built-in web-based configuration manager of the
FWG114P.