User's Manual Part 2
Table Of Contents
- Chapter 7 Print Server
- Chapter 8 Virtual Private Networking
- Overview of FWG114P Policy-Based VPN Configuration
- Using Digital Certificates for IKE Auto-Policy Authentication
- Walk-Through of Configuration Scenarios on the FWG114P
- How to Use the VPN Wizard to Configure a VPN Tunnel
- Netgear VPN Client to FWG114P
- Step-By-Step Configuration of FWG114P Gateway
- Step-By-Step Configuration of the Netgear VPN Client
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
8-20 Virtual Private Networking
March 2004, 202-10027-01
Scenario 1: FWG114P to FWG114P with Preshared Secrets
Note: This scenario assumes all ports are open on the FWG114P. You can verify this by reviewing
the security settings as seen in the “Rules menu” on page 6-5.
Figure 8-11: LAN to LAN VPN access from an FWG114P to an FWG114P
Use this scenario illustration and configuration screens as a model to build your configuration.
1. Log in to the FWG114P labeled Gateway A as in the illustration.
Log in at the default address of http://192.168.0.1 with the default user name of
admin and
default password of
password, or using whatever password and LAN address you have
chosen.
2. Configure the WAN (Internet) and LAN IP addresses of the FWG114P.
a. From the main menu Setup section, click on the Basic Setup link.
Figure 8-12: FWG114P Internet IP Address menu
b. Configure the WAN Internet Address according to the settings above and click Apply to
save your settings. For more information on configuring the WAN IP settings in the Basic
Setup topics, please see “Manually Configuring Your Internet Connection” on page 3-17.
*DWHZD\%
6FHQDULR
:$1,3
:$1,3
/$1,3
/$1,3
*DWHZD\$
+Á.?wjËoåÔ±¤¤~Ë8ÁjjÄÄËÁjÝ?Ê+ÁÍË.jÁÜjÁ
Á?aM?a
#
8¤¤|+
3:5
02).4%2 -/$%- ).4%2.%4 ,/#!, 7,!.
7(67
$&7
$/(57
$&7
$/(57
/1.$&7
/1.$&7
+Á.?wjËoåÔ±¤¤~Ë8ÁjjÄÄËÁjÝ?Ê+ÁÍË.jÁÜjÁ
Á?aM?a
#
8¤¤|+
3:5
02).4%2 -/$%- ).4%2.%4 ,/#!, 7,!.
7(67
$&7
$/(57
$&7
$/(57
/1.$&7
/1.$&7
WAN IP
addresses
ISP provides
these addresses