User's Manual Part 2

Table Of Contents

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P

Virtual Private Networking 8-11

March 2004, 202-10027-01

The VPN Manual Policy fields are defined in the following table.

Table 8-1. VPN Manual Policy Configuration Fields

Field Description

General

These settings identify this policy and determine its major characteristics.

Policy Name The name of the VPN policy. Each policy should have a unique policy

name. This name is not supplied to the remote VPN Endpoint. It is used to

help you identify VPN policies.

Remote VPN Endpoint The WAN Internet IP address of the remote VPN firewall or client to which

you wish to connect. The remote VPN endpoint must have this

FWG114P’s WAN Internet IP address entered as its “Remote VPN

Endpoint.”

Traffic Selector These settings determine if and when a VPN tunnel will be established. If

network traffic meets all criteria, then a VPN tunnel will be created.

Local IP The drop down menu allows you to configure the source IP address of the

outbound network traffic for which this VPN policy will provide security.

Usually, this address will be from your network address space. The

choices are:

• ANY for all valid IP addresses in the Internet address space

Note: Selecting ANY means all traffic goes through the IPSec tunnel

and prevents access to the Internet.

• Single IP Address

• Range of IP Addresses

• Subnet Address

Remote IP The drop down menu allows you to configure the destination IP address of

the outbound network traffic for which this VPN policy will provide security.