User's Manual Part 2
Table Of Contents
- Chapter 7 Print Server
- Chapter 8 Virtual Private Networking
- Overview of FWG114P Policy-Based VPN Configuration
- Using Digital Certificates for IKE Auto-Policy Authentication
- Walk-Through of Configuration Scenarios on the FWG114P
- How to Use the VPN Wizard to Configure a VPN Tunnel
- Netgear VPN Client to FWG114P
- Step-By-Step Configuration of FWG114P Gateway
- Step-By-Step Configuration of the Netgear VPN Client
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
7-12 Print Server
March 2004, 202-10027-01
c. For Network Path or Queue, enter a dummy value, such as \\123, as shown below.
Select NO for “Do you print from MS-DOS-based programs?”.
d. Click Next.
Figure 7-2: Windows Add Printer Wizard
e. The printer wizard will display a message stating that "The Network Printer is off-line".
This is OK. Continue the Add Printer Wizard until finished.
f. When finished, go to Start -> Settings -> Printers. The new printer icon will be grayed out
indicating the printer is not ready.