User's Manual Part 2
Table Of Contents
- Chapter 7 Print Server
- Chapter 8 Virtual Private Networking
- Overview of FWG114P Policy-Based VPN Configuration
- Using Digital Certificates for IKE Auto-Policy Authentication
- Walk-Through of Configuration Scenarios on the FWG114P
- How to Use the VPN Wizard to Configure a VPN Tunnel
- Netgear VPN Client to FWG114P
- Step-By-Step Configuration of FWG114P Gateway
- Step-By-Step Configuration of the Netgear VPN Client
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
7-10 Print Server
March 2004, 202-10027-01
Figure 7-1: Print Port Configuration menu
Items shown on this screen are as follows:
•Port
If desired, click Browse Device to select a different device. The Select Device Port button
supports multi-port models, but the FWG114P Wireless Firewall/Print Server is a single-port
print server. The Port Name is shown in the Printer's Properties.
•Banner
Check this option to print a banner page before each print job. The User Name you enter will
be printed on the banner page. If using a PostScript Printer, check the PostScript box.
• Retry Interval
Determines how often Windows will poll the print server to establish a connection when the
printer is busy.