User's Manual Part 2
Table Of Contents
- Chapter 7 Print Server
- Chapter 8 Virtual Private Networking
- Overview of FWG114P Policy-Based VPN Configuration
- Using Digital Certificates for IKE Auto-Policy Authentication
- Walk-Through of Configuration Scenarios on the FWG114P
- How to Use the VPN Wizard to Configure a VPN Tunnel
- Netgear VPN Client to FWG114P
- Step-By-Step Configuration of FWG114P Gateway
- Step-By-Step Configuration of the Netgear VPN Client
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Print Server 7-7
March 2004, 202-10027-01
Identify the printer connected to the
FWG114P USB printer port.
a. From the Add Printer Wizard screen
selection lists, find the manufacturer and
model of the printer you connected to the
USB port on the FWG114P.
Click Next to proceed.
If the printer software is already installed
on this PC, the Add Printer Wizard will
inform you and let you keep the existing
driver.
b. Be sure to select the FWG114P_P1 port
in the Add Printer Wizard.
Click Next.
c. The Name Your Printer screen prompts
for a descriptive name and if you want it
to be the default. Enter your choices.
If prompted about Sharing, do not enable
Sharing.
Click Next to proceed and finish the Add
Printer Wizard steps.
Windows Add Printer Wizard
If you do not see your make and model printer in
the lists, and you are connected to the Internet,
you can click the Windows Update button to
download additional printer software from the
Microsoft Web site, or you can click the Have Disk
button to install the printer software from a disk
you have.
Windows Add Printer Wizard