User's Manual Part 2

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
6-14 Firewall Protection and Content Filtering
March 2004, 202-10027-01
Figure 6-9: E-mail menu
• Turn e-mail notification on. Select this check box if you want to receive e-mail logs and
alerts from the router.
• Send alerts and logs by e-mail. If you enable e-mail notification, these boxes cannot be
blank. Enter the name or IP address of your ISP’s outgoing (SMTP) mail server (such as
mail.myISP.com). You may be able to find this information in the configuration menu of your
e-mail program. Enter the e-mail address to which logs and alerts will be sent. This e-mail
address will also be used as the From address. If you leave this box blank, log and alert
messages will not be sent via e-mail. Check “My Mail Server requires authentication” if you
need to log in to your SMTP server in order to send e-mail. If this is checked, you must enter
the login name and password for your mail server.
Tip: You used this information when you set up your e-mail program. If you cannot remember
it, check the settings in your e-mail program.
• Send E-mail alerts immediately. You can specify that logs are immediately sent to the
specified e-mail address when any of the following events occur: