User's Manual Part 1
Table Of Contents
- Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
- Contents
- Chapter 1 About This Manual
- Chapter 2 Introduction
- Chapter 3 Connecting the FWG114P to the Internet
- Chapter 4 Wireless Configuration
- Chapter 5 Serial Port Configuration
- Chapter 6 Firewall Protection and Content Filtering
Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Connecting the FWG114P to the Internet 3-7
March 2004, 202-10027-01
3.
LOG IN TO THE WIRELESS FIREWALL/PRINT SERVER
a. From your PC, launch your Internet browser. Because you are not yet connected to the
Internet, your browser will display a page not found message.
b. Connect to the wireless firewall/print server by typing http://192.168.0.1 in the address
field of Internet Explorer or Netscape
®
Navigator.
Figure 3-5: Log in to the firewall
c.
Enter admin for the router user name and password for the router password, both in
lower case letters.A login window opens as shown here:
Figure 3-6: Login window
d.
After logging in to the router, you will see the Internet connection Setup Wizard on the
settings main page.