User's Manual

Advanced Configuration 8-1
M-10177-01
Chapter 8
Advanced Configuration
This chapter describes how to configure the advanced features of your ProSafe Wireless 802.11g
Firewall/Print Server Model FWG114P. These features can be found under the Advanced heading
in the Main Menu of the browser interface.
Using the WAN Setup Options
The first feature category under the Advanced heading is WAN Setup. This menu allows
configuration of LAN IP services such as DHCP and RIP. From the Main Menu of the browser
interface, under Advanced, click on LAN IP Setup to view the LAN IP Setup menu, shown below.
Figure 8-1: WAN Setup Menu
The WAN Setup options let you configure a DMZ server, change the MTU size and set the WAN
port speed. These options are discussed below.
• Connect Automatically, as Required
Normally, this option should be Enabled, so that an Internet connection will be made
automatically, whenever Internet-bound traffic is detected. In locations where Internet access
is billed by the minute, if this causes high connection costs, you can disable this setting.