User's Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P

Connecting the FWG114P to the Internet 3-13

M-10177-01

Note: After you finish setting up your router, you will no longer need to launch the ISP’s login

program on your PC in order to access the Internet. When you start an Internet application,

your router will automatically log you in.

a. Select you Internet service provisory from the drop-down list.

b. The screen will change according to the ISP settings requirements of the ISP you select.

c. Fill in the parameters for your ISP according to the Wizard-detected procedures starting on

page 3-8.

d. Click Apply to save your settings.

How to Configure a Serial Port Internet Connection

Use the procedure below to configure an Internet connection via the serial port of your FWG114P.

There are three steps to configuring the serial port of your firewall for an Internet connection:

1. Connect the firewall to your ISDN or dial-up analog modem

2. Configure the firewall

3. Connect to the Internet

Follow the steps below to configure a serial port Internet connection on your firewall.

1. Connect the FWG114P to your ISDN or dial-up modem

a. Turn off your Modem and connect the cable (C) from the serial port your FWG114P to the

modem.

Figure 3-11: Connect the ISDN or analog modem to the firewall

12VDC, 1.0A

4321

IN TERN ET

LO CA L

10/100M

USB

MODEM

ISDN or analog modem

FWG114P