User's Manual

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Introduction 2-7
M-10177-01
Table 2-1. LED Descriptions
Label Activity Description
POWER On Power is supplied to the firewall.
TEST On
Off
The system is initializing.
The system is ready and running.
PRINTER
ACT Blinking Data is being transmitted or received by the Printer port.
ALERT On (Amber) The printer is offline, is out of paper, or has a paper jam.
MODEM
ACT Blinking Data is being transmitted or received by the Modem port.
LINK On (Amber) The port has detected a link with an attached device.
INTERNET Note: The operation of these LEDs depends on how the WAN
port is configured. See
100 (100 Mbps) On
Off
The Internet (WAN) port is operating at 100 Mbps.
The Internet (WAN) port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
LOCAL
100 (100 Mbps) On
Off
The Local port is operating at 100 Mbps.
The Local port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking
The Local port detected a link with an attached device.
The Local port is transmitting or receiving data.
WLAN On The Wireless (WLAN) port is operating.