Quick Reference Guide

Reference Manual for the ProSafe Dual Band Wireless VPN Firewall FWAG114
Virtual Private Networking 7-9
VPN Policy Configuration for Manual Key Exchange
With Manual Key Management, you will not use an IKE policy. You must manually type in all the
required key information. Click the VPN Policies link from the VPN section of the main menu to
display the menu shown below.
Enable Authentication Use this checkbox to enable or disable ESP transform for this VPN policy.
You can select the ESP mode also with this menu.
Two ESP modes are available:
•Plain ESP
• ESP with authentication
Authentication
Algorithm
If you enable AH, then use this menu to select which authentication
algorithm will be employed.
The choices are:
• MD5 - the default
• SHA1 - more secure
NETBIOS Enable Check this if you wish NETBIOS traffic to be forwarded over the VPN
tunnel. The NETBIOS protocol is used by Microsoft Networking for such
features as Network Neighborhood.
Table 7-1. VPN Auto Policy Configuration Fields
Field Description